Check out the Roadstercycle home page.

NEW!!!!.... LED Charging system and voltage Monitor. Stock type batteries or the new Lithium. Using a microprocessor and surface mount technology this is the Ferrari of LED monitors not the cheap ones using old technology sold on Ebay. I've tried all the battery monitoring systems I could find before I decided on this one. Works great and easy to mount. Just attach the black wire to ground and the red wire to your ignition switch key on circuit or directly to your battery and when your bike is off it will flash like an alarm. I've been running this on my ZRX 1200 for a few months now and I love looking down and seeing the green light telling me my charging system is working fine. At first I thought the 10 mm LED it may be too bright at night but as far as I am concerned it has just the right brightness.

The warning indications are as follows:
Green, light charging fine, The window is about 13.2 to 14.8 volts.
Green and red alternating is over voltage 15.2
Amber, (bike running) hook up a voltmeter on your bike and see what's happening with it running.
Red or red flashing means your bike is probably not running and you have your lights on, or if your bike is running there is trouble in paradise and you need to take action not to get stranded. PS, The small square mounting boxes are no longer available. a 14mm round hole is needed for mounting.

Jack